UBX-2G

UBox 2-Gang Panel Box

PATENTED6061-T6 BILLET2-GANGALL-METAL

Every switch and outlet on a bare panel wall usually means field-fabricating a box, bending up a cover panel, and hoping it looks intentional. The UBox replaces all of that with one machined part: trace the supplied template between two ribs, cut the opening, drive the screws, and wire your devices. The box and faceplate are CNC-machined from billet 6061-T6 aluminum — all metal, no plastic — and the faceplate reads like it came with the building. Anodized black, powder-coated white, or natural aluminum; custom colors available on volume orders.

Material	Billet 6061-T6 aluminum
Construction	CNC-machined, all-metal, engraved faceplate
Configuration	2-gang · accepts standard decora-style devices
Finishes	Anodized black · powder-coated white · natural aluminum
Mounting	Flat span between panel ribs · supplied cut template
Includes	Box, faceplate, mounting hardware, cut template
Design	Patented · engineered to NEC Art. 314 / UL 514A requirements
Made in	Van Alstyne, Texas, USA

SPEC SHEET & DIMENSIONAL DRAWING: request from the shop

$149/ each

In-stock finishes ship in 5-7 business days

Anodized black Powder-coated white Natural aluminum

Custom color? Volume order? Ask the shop

Direct from the shop that machines it

Machined from billet 6061-T6 aluminum in Van Alstyne, Texas — no castings, no imports
In-stock finishes ship in 5-7 business days
Every UBox is inspected by a machinist before it's boxed. If it doesn't meet print, we replace it or refund it.
Volume pricing and custom colors for builders — ask the shop

The install

Three steps. No fabrication.

01

Trace & cut

Set the supplied template in the flat span between two ribs, trace it, and cut the opening. The template gives you exact lines and screw locations — no measuring, no guesswork.

02

Mount the box

Set the UBox in the opening and drive the supplied fasteners. The body sits square in the span and the faceplate covers your cut edge.

03

Wire & finish

Pull your supply, land your devices, and attach the engraved faceplate. The wall looks factory-finished, and your inspector sees an all-metal box, not a field fab.

Full install guide →

Common questions

Before you order

Which panel profiles does the UBox fit?

The UBox mounts in the flat span between the raised ribs of common steel wall panels. Send us your panel brand or profile — or a photo with a tape measure across one span — and we'll confirm fit before you order. The supplied template shows the required flat width.

What's included with each UBox?

The machined box body, the engraved faceplate in your chosen finish, mounting hardware, and the cut template. Add your wiring and devices and the opening is done.

Is the UBox UL listed?

Not yet — and we won't pretend otherwise. The UBox is engineered to UL 514A (the standard for metallic outlet boxes) and NEC Article 314, machined in a shop that works to print every day. Independent laboratory listing is planned as volume ramps. Requirements vary by jurisdiction, so check with your local inspector — and ask us for the spec sheet to show them.

What devices fit it?

Standard decora-style switches, receptacles, dimmers, and inserts — the same devices you'd buy at any supply house. The launch configuration is 2-gang; tell us which configurations you want next.

What finishes are available?

Anodized black, powder-coated white, and natural aluminum, all machined from the same billet stock. On volume orders we can run custom powder-coat colors to match your trim — ask before you order.