RH-FC-600 High-Capacity Cart with Data Logging

The RH-FC-600 is built for facility-scale commissioning where the paperwork matters as much as the fill. Dual 316L centrifugal pumps on a VFD deliver up to 60 GPM, and the 7-inch touchscreen runs programmable fill, flush, and pressure-decay routines with pass/fail criteria you set. Every test logs to CSV on a USB stick - pressure, temperature, flow, and decay rate, timestamped - so your commissioning report writes itself. Parallel filter housings let you swap 25-micron elements mid-job without breaking flow.

Flow rate	60 GPM max (dual 316L centrifugal pumps, VFD-controlled)
Hydrostatic test range	0-100 psi via dedicated 316L gear pump test circuit
Pressure decay test	Automated routines with programmable hold time and pass/fail limits
Data logging	7 in touchscreen HMI; CSV export to USB - pressure, temp, flow, decay rate
Filtration	25 micron absolute, parallel housings for element swap under flow
Reservoir	110 gal polyethylene with sight level, drain, and lid strainer
Fluid compatibility	PG25, PG30, DI water (316L / EPDM / PTFE wetted path)
Power	208V, 30A, three phase
Dimensions / weight	34 in W x 60 in L x 66 in H; 980 lb dry; 8 in casters with total locks; 5 gal drip pan

RELATED: RH-FC-150 → RH-FC-300 → RH-FC-FE25 →  ·  All fill, flush & pressure-test carts →