RH-QDA-08-HB12

UQD08 to 3/4 in Hose Barb Adapter

316L SSUQD08PG25

Full-flow transition for UQD08 row and CDU connections: G 1/2 BSPP male into the coupling termination, 3/4 in multi-barb out to hose. The bore is kept at full nominal diameter so the adapter is not the restriction in your loop. EPDM boss seal, 316L body, passivated per ASTM A967.

Body material	316L stainless steel, machined from bar
Seal material	EPDM O-ring, 70A, peroxide-cured (PG25 / DI water compatible)
UQD side	G 1/2 BSPP male per ISO 228-1; fits UQD08 G 1/2 female termination
Hose side	3/4 in multi-barb; use band or 2-ear clamp on PG25-rated hose
Working pressure	Designed to 150 psi (10.3 bar); ORV3 secondary loops typically run below 50 psi
Temperature range	-4 to 194 F (-20 to 90 C)
Finish	Passivated per ASTM A967; cleaned, capped, and bagged
Wrench flats	7/8 in hex

$110/ ea

In-stock parts ship in 5-7 business days

PO instead? Send it over

Direct from the shop that machines it

316L stainless on every wetted surface, mill certs available on request

Cleaned, capped, and bagged for coolant service before it ships

In-stock parts ship in 5-7 business days from Van Alstyne, Texas

POs and net-30 for approved accounts; card payment by secure link