Threaded-Rod Drop Kit, Overhead Coolant Line Support

Everything for four overhead drops supporting coolant supply and return runs between the CDU and the rack line: 3/8-16 all-thread, strut-compatible channel hardware, and machined saddle brackets sized for insulated coolant hose and pipe up to 2 inch OD. Saddles are radiused and deburred so they will not chew through hose jacket or insulation over years of thermal cycling. Rod couplers included so drops can be extended for high ceilings. Attachment to building structure is by others - use rated beam clamps or concrete anchors per your project spec.

Rod	3/8-16 zinc-plated all-thread, 4 x 36 in lengths, couplers included
Working load rating	300 lbf per drop (5:1 on rod tensile)
Saddle capacity	Coolant hose or pipe 0.75-2.0 in OD, insulated or bare
Saddle material	Machined 6061-T6 aluminum, radiused bearing surface
Finish	Zinc plated rod per ASTM B633; anodized saddles
Hardware included	4 rods, 4 saddles, 8 couplers, channel nuts, hex nuts, washers
Compatibility	Fits 1-5/8 in strut channel; building attachment hardware by others

RELATED: RH-MB-U2 → RH-SR-450 → RH-SO-12 →  ·  All manifold mounting & seismic hardware →