RH-FH-125

Inline Filter Housing, 1 in NPT, 25 Micron

316L SS25 MicronIn Stock

A single-cartridge inline housing machined from 316L bar, not cast. Accepts standard 2.5 in OD x 9.75 in double-open-end cartridges, so you are never locked to our elements. Ships with one 25 micron pleated polypropylene element installed, plus 1/4 in FNPT gauge ports upstream and downstream for differential pressure monitoring. Vent and drain ports let you swap elements without dumping the line.

Connections	1 in FNPT inlet/outlet; 1/4 in FNPT gauge, vent, and drain ports
Flow capacity	10 GPM max; 5 GPM recommended for side-stream service
Element format	2.5 in OD x 9.75 in DOE cartridge (industry standard)
Micron rating	25 micron nominal as shipped; accepts 5-50 micron elements
Body material	316L stainless, machined from bar
Seal material	EPDM O-rings, PG25 compatible
Working pressure	150 psi @ 140 F; hydrostatically tested to 225 psi
Cleanliness	DI-flushed, capped, and double-bagged for coolant service

$1,300/ ea

Components ship in 5-7 business days

PO instead? Send it over

Direct from the shop that machines it

316L stainless on every wetted surface, mill certs available on request

Cleaned, capped, and bagged for coolant service before it ships

Components ship in 5-7 business days from Van Alstyne, Texas

POs and net-30 for approved accounts; card payment by secure link