RH-QDA-08-G12

UQD08 to G 3/4 BSPP Transition

316L SSUQD08BSPP

Steps a UQD08 termination up to a G 3/4 BSPP manifold or CDU port with parallel threads and EPDM boss seals on both ends, so the entire joint seals on elastomer instead of thread sealant. This is the clean way to move between BSPP port sizes in a PG25 loop. Machined from 316L bar, full-bore, passivated per ASTM A967.

Body material	316L stainless steel, machined from bar
Seal material	EPDM O-rings, 70A, peroxide-cured, both ends
UQD side	G 1/2 BSPP male per ISO 228-1; fits UQD08 G 1/2 female termination
Port side	G 3/4 BSPP male per ISO 228-1, boss-seal shoulder
Working pressure	Designed to 500 psi (34.5 bar); far above ORV3 secondary-loop service
Temperature range	-4 to 194 F (-20 to 90 C)
Finish	Passivated per ASTM A967; cleaned, capped, and bagged
Wrench flats	1-1/16 in hex

$130/ ea

In-stock parts ship in 5-7 business days

PO instead? Send it over

Direct from the shop that machines it

316L stainless on every wetted surface, mill certs available on request

Cleaned, capped, and bagged for coolant service before it ships

In-stock parts ship in 5-7 business days from Van Alstyne, Texas

POs and net-30 for approved accounts; card payment by secure link